Archive for the ‘TiVo DVR’ Category

Series3

Saturday, August 23rd, 2008

The Series3 TiVo was officially unveiled at the 2006 Consumer Electronics Show, and was released to the public on September 12, 2006.

The Series3 DVR features support for high-definition broadcasts and has two tuners, each of which can receive NTSC, ATSC, and analog or digital cable (QAM). Encrypted digital cable can be received using CableCARDs. Because of the dual tuners, it can record from any two sources simultaneously. For example, two over-the-air broadcasts, two cable programs, or any combination can be recorded at the same time. However, recording from two digital cable channels requires the use of multiple CableCARDs, and if only one CableCARD is inserted into the unit, only one tuner is active and only one source can be recorded. As of 8/2007 satellite TV connections are not supported.

2008 DirecTivo Updates

Saturday, August 23rd, 2008

In October of 2007, DirecTV sent a message to all DirecTv TiVo R10 and HR10 users saying that they will be applying numerous features to the DirecTivo. The features will be listed below.

Series2 DirecTV

Saturday, August 23rd, 2008

Some TiVo systems are integrated with DirecTV receivers. These “DirecTiVo” recorders record the incoming satellite MPEG-2 digital stream directly to hard disk without conversion. Because of this and the fact that they have two tuners, DirecTiVos are able to record two programs at once. In addition, the lack of digital conversion allows recorded video to be of the same quality as live video. DirecTiVos have no MPEG encoder chip, and can only record DirecTV streams. However, DirecTV has disabled the networking capabilities on their systems, meaning DirecTiVo does not offer such features as multi-room viewing or TiVoToGo. Only the standalone systems can be networked without additional unsupported hacking.

The latest DirecTiVo units (HR10-250) can also record HDTV to a 250GB hard drive, both from the DirecTV stream and over-the-air via a standard UHF- or VHF-capable antenna. They have four tuners (two DirecTV and two ATSC over-the-air) and, like the original DirecTiVo, can record two programs at once; further, the program guide is integrated between over-the-air and DirecTV so that all programs can be recorded and viewed in the same manner. Recording capacity is variable, up to 30 HD or 200 SD hours.

Series2 DirecTV

Saturday, August 23rd, 2008

Some TiVo systems are integrated with DirecTV receivers. These “DirecTiVo” recorders record the incoming satellite MPEG-2 digital stream directly to hard disk without conversion. Because of this and the fact that they have two tuners, DirecTiVos are able to record two programs at once. In addition, the lack of digital conversion allows recorded video to be of the same quality as live video. DirecTiVos have no MPEG encoder chip, and can only record DirecTV streams. However, DirecTV has disabled the networking capabilities on their systems, meaning DirecTiVo does not offer such features as multi-room viewing or TiVoToGo. Only the standalone systems can be networked without additional unsupported hacking.

The latest DirecTiVo units (HR10-250) can also record HDTV to a 250GB hard drive, both from the DirecTV stream and over-the-air via a standard UHF- or VHF-capable antenna. They have four tuners (two DirecTV and two ATSC over-the-air) and, like the original DirecTiVo, can record two programs at once; further, the program guide is integrated between over-the-air and DirecTV so that all programs can be recorded and viewed in the same manner. Recording capacity is variable, up to 30 HD or 200 SD hours.

Series2 Standalone

Saturday, August 23rd, 2008

All standalone TiVo systems have coax/RF-in and an internal cable-ready tuner, analog video input—composite/RCA, and S-Video—for use with an external cable box or satellite receiver. The TiVo unit can use a serial cable or IR blasters to control the external receiver. They have coax/RF, composite/RCA, and S-Video output, and the DVD systems also have component out. Audio is RCA stereo, and the DVD systems also have digital optical out. The Series2 systems also have USB ports, currently used only to support network (wired Ethernet and WiFi) adapters. The early Series2 units, models starting with 110/130/140, have USB1.1 hardware, while all other systems have USB2.0.

Some models manufactured by Toshiba, Pioneer, and Humax, under license from TiVo, contain DVD-R/RW drives. The models can transfer recordings from the built-in hard drive to DVD Video compliant disc, playable in most modern DVD systems. The video encoding on these models was modified to match the DVD standard so transferring to DVD does not require transcoding.

The Series2 standalones can only tune analog signals, so to comply with FCC rules on analog TV phaseout, models that record from over-the-air channels are no longer sold. The dual tuner (DT) models and the TCD542 (a revision of the TCD540) will only record from cable and satellite sources.

Series2

Saturday, August 23rd, 2008

The Series2 was a complete redesign of the TiVo hardware. It includes USB ports (for Ethernet and Wi-Fi adapters), a new CPU, and more RAM. The availability of network connectivity has spread to the software side, where new features like TiVoToGo and Home Media Engine applications are now supported.

Series2 TiVo systems are based on MIPS processors connected to MPEG-2 encoder/decoder chips and high-capacity IDE/ATA hard drives. Current Series2 units have drives of 40–250GB in size. Although not supported by TiVo or equipment manufacturers, larger drives can be added.

Series1 DirecTV

Saturday, August 23rd, 2008

Some TiVo systems are integrated with DirecTV receivers. These “DirecTiVo” recorders record the incoming satellite MPEG-2 digital stream directly to hard disk without conversion. Because of this and the fact that they have two tuners, DirecTiVos are able to record two programs at once. In addition, the lack of digital conversion allows recorded video to be of the same quality as live video. DirecTiVos have no MPEG encoder chip, and can only record DirecTV streams.

* CPU: IBM PowerPC 403GCX at 70-80 MHz
* RAM: 32 MB

Series1 Standalone

Saturday, August 23rd, 2008

All standalone TiVo systems have coax/RF-in and an internal cable-ready tuner, analog video input—composite/RCA, and S-Video—for use with an external cable box or satellite receiver. The TiVo unit can use a serial cable or IR blasters to control the external receiver. They have coax/RF, composite/RCA, and S-Video output, and the DVD systems also have component out. Audio is RCA stereo, and the DVD systems also have digital optical out.

* CPU: IBM PowerPC 403GCX at 54 MHz
* RAM: 16 MB

Series1

Saturday, August 23rd, 2008

The Series1 (retronym) was the original TiVo digital video recorder.

Series1 TiVo systems are based on PowerPC processors connected to MPEG-2 encoder/decoder chips and IDE/ATA hard drives. Series1 TiVo units used one or two drives of 13–60 GB. Although not supported by TiVo or equipment manufacturers, larger drives can be added.